Asrock H61M-GE Extreme Driver
Download Asrock H61M-GE Atheros LAN Driver (Network Card) ASRock Extreme Tuning Utility (AXTU) - Instant Boot - ASRock. AORUS XTREME, GeForce RTX Ti, 11 GB, GHz. (1), $, Add. Asus DUAL-GTXO6G. Dual, GeForce GTX 6GB, 6 GB, GHz. Intel X58, X58 Extreme6 · X58 Extreme3 · X58 Extreme Intel H61, H61M-ITX · H61TM-ITX . NVIDIA GeForce , NGE · NGS.
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* [*Free Registration Required]|
Asrock H61M-GE Extreme Driver
Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. When placing Asrock H61M-GE Extreme into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws!
ASRock H61M-VG4 (H61MVG4BULK) Motherboard
Doing so may damage the motherboard. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged. Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab.
Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees.
Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.
Drivers and utilites for ASRock motherboards - choice of model.
This cap must be placed if returning the motherboard Asrock H61M-GE Extreme after service. Step 3. Insert the Pin CPU: Hold the CPU by the edges where are marked with black lines. Locate Pin1 and the two orientation key notches.
Carefully place the CPU into the socket by Asrock H61M-GE Extreme a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.
Asrock H61M-GE -
Secure load lever with load plate tab under retention tab of load lever. Below is an example to illustrate the installation of the heatsink for Pin CPU.
Step 1. Apply thermal interface material onto center of Step 2. Place the heatsink onto the socket.
Asrock h61m ge
Ensure IHS on the socket surface. Align fasteners with the motherboard throughholes. Rotate the fastener clockwise, then press down on fastener caps with thumb to install A Step 5. Step 6. Repeat with remaining fasteners. If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Connect fan header with the Asrock H61M-GE Extreme fan connector Asrock H61M-GE Extreme the motherboard.
ASRock H61M-GE - motherboard - micro ATX - LGA Socket - H61 Specs - CNET
Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Please be noticed that Asrock H61M-GE Extreme motherboard supports Combo Cooler Option C. Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology.
It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward.