ASRock H61M-GS Intel VGA Treiber Windows 10


Download Now
ASRock H61M-GS Intel VGA Driver

Thank you for purchasing ASRock H61M-GS / H61M-S motherboard, a reliable motherboard Intel® HD Graphics Built-in Visuals and the VGA outputs. Picture of ASRock H61M-GS Motherboard Core i7/i5/i3 Socket H61 . Supports Intel HD Graphics Built-in Visuals: Intel Quick Sync Video, Intel Clear. All drivers and utilities for motherboards ASRock H61M-GS - free download. Intel Graphics Accelerator Driver v Supported OS: Windows Vista.


Download Driver: ASRock H61M-GS Intel VGA

Type: Driver
Rating:
3.45
171 (3.45)
Downloads: 846
File Size: 17.47Mb
Supported systems: Windows All
Price: Free* [*Free Registration Required]

Download Now
ASRock H61M-GS Intel VGA Driver

Please refer to below steps for the software setting of Multi-Streaming. For Windows XP: ASRock H61M-GS Intel VGA restarting your computer, you will find Mixer tool on your system. Please select Mixer ToolBoxclick Enable playback multi-streaming, and click ok. Then reboot your system. Set Speaker Configuration to Quadraphonic or Stereo.

ASRock H61M-GS, LGA 775/Sockel T, Intel Motherboard

Click Device advanced settings, choose Make front and rear output devices playbacks two different audio streams simultaneously, and click ok. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard ASRock H61M-GS Intel VGA into it. Make sure to unplug the power cord before installing or removing the motherboard.

Failure to do so may cause physical injuries to you and damages to motherboard components. Do not over-tighten the screws!

Oc Tweaker Screen - Asrock H61M-GS User Manual [Page 36]

Doing so may damage the motherboard. Unplug the power cord from the wall socket before touching any component. To avoid ASRock H61M-GS Intel VGA the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.

Hold components by the edges and do not touch the ICs.

Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply.

Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.

ASRock H61M-GS Drivers and related drivers

Step 1. Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees.

  • Are you a human?
  • Материнская плата ASRock H61M-GS, s, H61, 2xDDR3, VGA-DVI, mATX
  • ASRock H61M-GS Motherboard Core i7/i5/i3 Socket 1155 H61 mATX Gigabit LAN
  • Asrock H61M-GS

Rotate the load plate to fully open position at approximately degrees. Step 2.

Intel Core i3 3220 @ 2593.81 MHz

It is recommended to use ASRock H61M-GS Intel VGA cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service. Insert the Pin CPU: Hold the CPU by the edge where is marked with black line.

ASRock H61M-GS Intel VGA Windows 8 X64

Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion.

Compatible Motherboards

Verify that the CPU is ASRock H61M-GS Intel VGA the socket and properly mated to the orient keys. Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat.

Drivers: ASRock H61M-GS Intel VGA

Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation.

Related Posts