3Com 3C16817-US Driver
$ End Date: Sunday May PDT Buy It Now for only: $ Buy It Now Add to watch list. 3COM WLAN Managed Access Point Use this GBIC to provide BASE-T connectivity to a 3Com Switch or 2 Gigabit Ethernet Starter Kit (product # 3CUS), 3Com Switch R. Official 3Com 3CUS Free Documentation Download - pdf . World's most popular driver download site.
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* [*Free Registration Required]|
3Com 3C16817-US Driver
This is a partial text extraction from the pdf, to download the pdf, click the Manual tab.
If you want to search this text, hold control and 3Com 3C16817-US, and type the word you are 3Com 3C16817-US for. The 24 - 3Com 3C16817-US GEN Switch Fabric CoreBuilder Module has 24 nonblocking Gigabit Ethernet ports that connect to the chassis backplane to provide high - speedlow - latency connectivity between CoreBuilder switching modules.
You can install the 24 - port GEN Switch Fabric Module in the 7 - slot chassis8 - slot chassisor 16 - slot chassis.
In 3Com 3C16817-US 8 - slot chassis and 16 - slot chassisyou install the module vertically with the LEDs at the top. This guide is intended for trained technical 3Com 3C16817-US only. Do not Audience Description attempt to installremoveor replace the module if you have not had the proper training from 3Com.
For numbers to call in other locationsvisit the 3Com Web site: 3Com 3C16817-US avoid electric shocksburnsor equipment damageread and follow these warnings: Allow only trained service personnel to installremoveor replace any module in the chassis. Hazardous energy exists within the system. Use extreme caution when 3Com 3C16817-US install3Com 3C16817-USor replace any module in the chassis.
When the system is on: ESDwhich occurs when the module is improperly handledcan cause 3Com 3C16817-US or intermittent failures. To prevent ESD - related damage: When you handle the modulefollow these precautions: In the 8 - slot or 16 - slot chassismatch the upper and lower module guides.
3CUS SWR GEN L2 KIT
Remove the modulein its antistatic bagfrom the shipping box. Handle 3Com 3C16817-US module only by the front panel. 3Com 3C16817-US not touch any componentspinsleadsor solder connections.
If the module appears to be damagedreplace it in its antistatic bagput it back in the shipping boxand contact your network supplier. Verify that the box also contains: 3Com 3C16817-US shipping boxes are reusable.
3Com 3CUS, Version driver - 3Com Network Drivers -
After you remove the contentsreplace the packing 3Com 3C16817-US and store the shipping box for future use. All modules in a CoreBuilder chassis must operate at compatible software levels. You must verify the software release on all new and existing modules in your chassis and upgrade as necessary.
The availability 3Com 3C16817-US two slots allows for redundant operation. It also receives all traffic that the primary GEN Switch Fabric Module receivesbut its transmit functions are disabled.
3Com 3C16817-US, Version 3.0.6 Network Driver
If a problem occurs with the primary modulethe system software immediately enables the transmit function of the 3Com 3C16817-US GEN Switch Fabric Modulekeeping the network up and running. The module capacity is expressed in Chassis terms 3Com 3C16817-US 48 Gigabit Ethernet backplane ports. One or more of these 24 - port GEN Switch Fabric Module backplane ports are assigned to each switching module slot ; the exact number depends 3Com 3C16817-US the chassis type and slot number. When a switching module is installedits rear ports communicate with the 24 - port GEN Switch Fabric Module backplane ports that are assigned to that slot.
Use this information to decide where to place switching modules and 3Com 3C16817-US general administration purposes. To expose a slot for the moduleremove the blank faceplate.
Empty 3Com 3C16817-US must be covered to ensure proper airflow and cooling in the chassis. Open the module ejector handles. Figure 2 shows the module position in a 7 - slot chassis.
3COM 3C16817 SWITCH 4007R LAYER 2 GIGABIT ETHERNET
3Com 3C16817-US 3 shows the module position in a 16 - slot chassis. The module position is the same in an 8 - slot chassis. Do not twist or bend the module when you insert it. Slide the module into the chassis by pushing firmly on the two ends of 6 the front panel near the ejector handles.
Hazardous energy exists inside the chassis. Do not 3Com 3C16817-US hands or objects into the chassis or touch any components on an inserted module. Push firmly at the two ends of the front panel near the ejector handles a until 3Com 3C16817-US feel the module connectors make firm contact with the backplane connectors.
Put your left thumb on the left or top ejector handle and your right 3Com 3C16817-US thumb on the right or bottom ejector handle.