American Megatrends AMI MegaRAID IDE 100 Drivers


Download Now
American Megatrends AMI MegaRAID IDE 100 Driver

AMI MegaRAID The American Megatrends MegaRAID is a software IDE RAID controller that makes use of the American Megatrends MG controller. The chip on the card is capable of supporting up to a total of 4 drives on two IDE channels, just like every other IDE controller. AMI/LSI Logic predominantly does retail business. On September 4, the controller division from American Megatrends, Inc. was sold to LSI. Added MMX Test, IDE Boot Sector Test, and SCSI Self Tests. 1/24/98 .. 5 IDE Device Diagnostics. cluster support (AMI MegaRAID only) Ultra DMA support for up to and including UDMA. IDE CD-ROM Tests.


American Megatrends AMI MegaRAID IDE 100 Driver Windows

Type: Driver
Rating:
3.01
256 (3.01)
Downloads: 943
File Size: 18.77Mb
Supported systems: Windows XP/Vista/7/8/10, MacOS 10/X
Price: Free* [*Free Registration Required]

Download Now
American Megatrends AMI MegaRAID IDE 100 Driver

- Free Drivers and Support

The benchmarks were consistent whether the audio files were just a few seconds long or lasted over five minutes. Write speeds were significantly lower - just in the 9 MBps range. American Megatrends AMI MegaRAID IDE 100, testing the pair of DiamondMax Plus 60s in a RAID 1 redundant configuration showed a slight reduction from the single drive's performance. The system mirrors the data so even if one drive fails, nothing is lost.

There are two 60 GB drives, but the system only sees one 60 GB partition. The performance hit, of course comes from having to duplicate data across the drives.

Read speeds dropped to 31 MBps - a decrease of about 14 percent. Write speeds remained about the same. The tradeoff is the tremendous reliability.

American Megatrends AMI MegaRAID IDE 100 Drivers for Windows 10

The odds of a dual failure caused by anything short of the physical destruction of American Megatrends AMI MegaRAID IDE 100 computer are infinitesimal. For pure performance, setting the two drives to interleave as a single partition in RAID 0 made for record setting read speeds. Write speeds inched up a bit, but were still rather slow at 12 MBps. Of course, such high-speed thrills can be risky.

American Megatrends MegaRAID IDE -

While mirroring multiplies reliability, striping drives in RAID 0 multiplies both speed and risk. If either drive fails, everything is lost.

This stripeset will be written simultaneously onto an additional array that will continue running if the primary one should fail. Starting at three drives, high-end RAID controllers use intelligent algorithms with checksums to distribute data on all drives that are available. RAID 3 uses one drive to store parity information, while RAID 5 stores that information American Megatrends AMI MegaRAID IDE 100 to all drives, offering even better performance.

RAID Level 5 has become the dominant mode for critical servers.

American Megatrends Storage Drivers Download

They have useful illustrations of RAID mode 5. Data Safety vs. Performance While RAID setups for servers are created to protect data against hardware failure, home users primarily focus on the possible performance gain. While a RAID 3 or RAID 5 setup provides excellent fault-tolerance together with pretty fast transfer rates and access, it is quite expensive to implement: Second, these types of controllers are American Megatrends AMI MegaRAID IDE 100 the most expensive hardware you can buy.

The high price in itself explains why RAID modes 3 and 5 have not been accepted in the mass market. Instead, RAID 0 and 1 have become the popular modes that the majority of users implement. As you will see later, using a American Megatrends AMI MegaRAID IDE 100 instead of a two-drive stripeset does not increase transfer performance by much, but this makes sure that the minimum transfer speeds remain impressively high throughout the whole medium.

American Megatrends AMI MegaRAID IDE 100 Drivers Windows

The main reason why such controllers are integrated directly onto motherboards? On-board RAID gives motherboards an excellent added-value feature while not adding much to the overall board price tag. Retail kits such as the ones American Megatrends AMI MegaRAID IDE 100 tested from AMI and Promise are more expensive, but they come with two pin IDE cables, comprehensive manuals and sometimes additonal management software or other add-ons.

Driver Updates

On the one hand, a software array is more flexible, as you can use almost every drive that is accessible by Windows. On the other hand rescuing the data can be more problematic if either Windows or one of the drives crashes - so the data safety issue American Megatrends AMI MegaRAID IDE 100 something that you should think about twice. Products and support are kept up without interruption.

Related Posts