ASRock H61M-VG3 XFast LAN Drivers Download Free

Download Now
ASRock H61M-VG3 XFast LAN Driver

Find Asrock H61M-VG3 Price in KSA at price SAR , specifications, XFast LAN can lower latency in the game after setting online game priority higher. All drivers and utilities for motherboards ASRock H61M-VG3 - free download. ASRock XFast LAN Utility v WHQL Supported OS: Windows XP. CH HD Audio (Realtek ALC Audio Codec); PCIE x1 Gigabit LAN 10// Mb/s; Supports ASRock XFast , Fast Boot, Restart to UEFI, Dehumidifier.

ASRock H61M-VG3 XFast LAN Windows Vista 32-BIT

Type: Driver
383 (3.86)
Downloads: 1005
File Size: 28.85Mb
Supported systems: ALL Windows 32x/64x
Price: Free* [*Free Registration Required]

Download Now
ASRock H61M-VG3 XFast LAN Driver

Doing so may damage the ASRock H61M-VG3 XFast LAN. Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.

Download ASRock XFast USB Utility

Hold components by the edges and do not touch the ICs. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. ASRock H61M-VG3 XFast LAN

Do not force to insert the CPU into the socket if ASRock H61M-VG3 XFast LAN situation is found. Otherwise, the CPU will be seriously damaged. Step 1. Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees.

Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.

This cap must be placed if returning the motherboard for after service. Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using ASRock H61M-VG3 XFast LAN purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4.

Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever. ASRock H61M-VG3 XFast LAN adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation.

Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is ASRock H61M-VG3 XFast LAN example to illustrate the installation of the heatsink for Pin CPU.

ASRock H61M-VG3 XFast LAN Drivers PC

Apply thermal interface material onto center of IHS on the socket surface. Apply Thermal Interface Material Step 2. Place the heatsink onto the socket.

: H61M-VG3 - Mainboard - Mikro-ATX: Computers & Accessories

Step 3. Align fasteners with the motherboard throughholes.

Driver for ASRock H61M-VG3 XFast LAN

Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners. Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners ASRock H61M-VG3 XFast LAN rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Connect fan header with the CPU fan connector on the motherboard.

Step 6. Intel R Rapid Start Technology is a new zero power hibernation mode which allows users to resume in just seconds. The default is [10 minutes].

Related Posts